Unistrut P1100SL - 1-5/8" x 1-5/8", 14 Gauge, Metal Framing Strut, Long Slots

Unistrut

Unistrut P1100SL - 1-5/8" x 1-5/8", 14 Gauge, Metal Framing Strut, Long Slots

Sale price$0.00
Sold out
Length:10'
Finish:Perma-Green® III
Quantity:

CUT TO A CUSTOM LENGTH? MAY SAVE ON SHIPPING

HOW WOULD YOU LIKE IT CUT?

Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order. eg - 4 cuts per stick x 5ft per section

14 Gauge Slotted Strut Channel P1100SL has long slots on the back side for use with 3/8" threaded rod and fasteners. These slots can eliminate the need for field drilling and allow adjustability when installing. The slots are 3" long with 1" spacing.

Features:

  • Slotted for adjustability
  • Product dimensions are 1 5/8" wide x 1 5/8" tall x 14 ga. thick; with slots.
  • The slots are 13/32" wide x 3" long, 4" on center and sized for use with 3/8" threaded rod or fasteners
  • Our P1000SL is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Zinc Dichromate (ZD) and Stainless Steel (SS).
  • Made in the USA


Brands Available:

  • Unistrut

 

Beam Loading

Beam Loading - P1100SL
Span
(in)
Max Allowable Uniform Load
(lbs)
Deflection at Uniform Load
(in)
Uniform Loading at Deflection Lateral Bracing Reduction Factor
Span/180
(lbs)
Span/240
(lbs)
Span/360
(lbs)
24 1,148 0.06 1,148 1,148 1,148 1.00
36 765 0.13 765 765 595 0.89
48 578 0.23 578 502 340 0.78
60 459 0.36 434 323 213 0.68
72 383 0.51 298 221 153 0.59
84 332 0.7 221 162 111 0.52
96 289 0.92 170 128 85 0.47
108 255 1.15 136 102 68 0.43
120 230 1.42 111 77 51 0.40
144 196 2.09 77 60 34 0.36
168 162 2.75 51 43 26 0.32
192 145 3.67 43 34 NR 0.30
216 128 4.61 34 26 NR 0.28
240 119 5.9 26 NR NR 0.26
Note NR - Not Recommended
Refer to the General Specifications for loading information.

Column Loading

Column Loading - P1100SL
Unbraced Height
(in)
Allowable Load at Slot Face
(lbs)
Max Column Load Applied at C.G.
K=0.65 (lbs) K=0.80 (lbs) K=1.0 (lbs) K=1.2 (lbs)
24 2,800 8,040 7,330 6,360 5,430
36 2,410 6,480 5,430 4,190 3,210
48 1,940 4,990 3,830 2,760 2,160
60 1,550 3,740 2,760 2,050 1,640
72 1,290 2,860 2,160 1,640 1,320
84 1,100 2,310 1,780 1,370 1,110
96 950 1,950 1,520 1,180 950
108 840 1,690 1,320 1,030 KL/r>200
120 760 1,490 1,180 KL/r>200 KL/r>200
144 630 1,210 950 KL/r>200 KL/r>200
Refer to the General Specifications for loading information.

Elements of Section

Elements of Section - P1100SL
Area of Section 0.418 in2 (2.7 cm2)
Axis 1-1 Axix 2-2
Moment of Inertia (I) 0.145 in4 (6 cm4) 0.176 in4 (7.3 cm4)
Section Modulus (S) 0.162 in3 (2.7 cm3) 0.217 in3 (3.6 cm3)
Radius of Gyration (r) 0.589 in (1.5 cm) 0.65 in (1.7 cm)

General Specifications

Standard Lengths:

  • 10 feet:  10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
  • 20 feet:  20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)

Special Lengths:

Curved Channel:

  • Many Unistrut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.

Load Data:

  • All beam and column load data pertains to carbon steel and stainless steel channels.
  • Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
  • Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
  • Loads are based on 33 ksi steel cold formed to 42 ksi.
  • Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
  • Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide under Resources.
  • For bearing loads, reference our Bearing Loads Page.

Materials & Finishes

Materials & Finishes - Standard:

  • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
  • Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
  • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
  • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
  • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
  • Plain (PL):  Conforms to ASTM A1011 SS GR 33
Materials & Finishes - Special Metals:
  • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
  • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
  • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

 

P1100SL CUT SHEET PDF DOWNLOAD