Unistrut P3000HS - 1-5/8" x 1-3/8", 12 Gauge Metal Framing Strut, Round Holes
Unistrut P3000HS - 1-5/8" x 1-3/8", 12 Gauge Metal Framing Strut, Round Holes

Unistrut

Unistrut P3000HS - 1-5/8" x 1-3/8", 12 Gauge Metal Framing Strut, Round Holes

Sale price$118.51
Length:10'
Finish:Perma-Green® III
Quantity:

CUT TO A CUSTOM LENGTH? MAY SAVE ON SHIPPING

HOW WOULD YOU LIKE IT CUT?

Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order. eg - 4 cuts per stick x 5ft per section

12 Gauge Strut Channel with Holes P3000HS has round holes on the back side for use with 1/2" threaded rod and fasteners (or smaller diameters with use of flat washers). These holes can eliminate the need for field drilling when installing a trapeze support, anchoring the channel to a surface, or for many other applications.


Features:

  • Product dimensions are 1 5/8" wide x 1 3/8" tall x 12 ga. thick; with round holes on one side
  • The holes are 9/16" in diameter and 1 7/8" on center.
  • The hole diameters and spacing match general fittings so that nearly all our fittings can be attached through these holes
  • Our P3000HS is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Zinc Dichromate (ZD), Stainless Steel (SS) and Aluminum (EA).
  • Made in the USA

 

Beam Loading

Beam Loading - P3000HS
Span
(in)
Max Allow. Uniform Load
(lbs)
Deflection at Uniform Load
(in)
Uniform Loading at Deflection Lateral Bracing Reduction Factor
Span/180
(lbs)
Span/240
(lbs)
Span/360
(lbs)
24 1,152 0.07 1,152 1,152 1,152 1.00
36 765 0.15 765 765 522 0.96
48 576 0.26 576 441 297 0.91
60 459 0.41 378 279 189 0.88
72 387 0.59 261 198 135 0.84
84 333 0.81 189 144 99 0.82
96 288 1.05 144 108 72 0.79
108 252 1.30 117 90 54 0.77
120 234 1.66 90 72 45 0.75
144 189 2.32 63 45 36 0.70
168 162 3.15 45 36 27 0.66
192 144 4.18 36 27 NR 0.62
216 126 5.21 NR NR NR 0.58
240 117 6.64 NR NR NR 0.54
Note NR - Not Recommended
Refer to the General Specifications for loading information.

Column Loading

Column Loading - P3000HS
Unbraced
Height
(in)
Allowable Load at Slot Face
(lbs)
Max Column Load Applied at C.G.
K=0.65 (lbs) K=0.80 (lbs) K=1.0 (lbs) K=1.2 (lbs)
24 2,400 6,650 6,080 5,280 4,470
36 2,050 5,380 4,470 3,370 2,500
48 1,600 4,090 3,040 2,100 1,590
60 1,230 2,960 2,100 1,500 1,160
72 970 2,190 1,590 1,160 910
84 790 1,720 1,270 950 760
96 660 1,410 1,060 800 650
108 570 1,200 910 700 KL/r>200
120 510 1,040 800 620 KL/r>200
144 420 830 650 KL/r>200 KL/r>200
Refer to the General Specifications for loading information.

Elements of Section

Elements of Section - P3000HS
Area of Section 0.5 in2 (3.2 cm2)
Axis 1-1 Axix 2-2
Moment of Inertia (I) 0.12 in4 (5 cm4) 0.203 in4 (8.4 cm4)
Section Modulus (S) 0.153 in3 (2.5 cm3) 0.250 in3 (4.1 cm3)
Radius of Gyration (r) 0.489 in (1.2 cm) 0.638 in (1.6 cm)

General Specifications

Standard Lengths:

  • 10 feet:  10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
  • 20 feet:  20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)

Special Lengths:

Curved Channel:

  • Many Unistrut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.

Load Data:

  • All beam and column load data pertains to carbon steel and stainless steel channels.
  • Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
  • Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
  • Loads are based on 33 ksi steel cold formed to 42 ksi.
  • Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
  • Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide under Resources.
  • For bearing loads, reference our Bearing Loads Page.

Materials & Finishes

Materials & Finishes - Standard:

  • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
  • Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
  • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
  • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
  • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
  • Plain (PL):  Conforms to ASTM A1011 SS GR 33
Materials & Finishes - Special Metals:
  • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
  • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
  • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

 

P3000HS Cut Sheet PDF DOWNLOAD