Unistrut P1000 - 1-5/8" x 1-5/8", 12 Gauge Channel, Metal Framing Strut, Solid
Unistrut P1000 - 1-5/8" x 1-5/8", 12 Gauge Channel, Metal Framing Strut, Solid
Unistrut P1000 - 1-5/8" x 1-5/8", 12 Gauge Channel, Metal Framing Strut, Solid

Unistrut

Unistrut P1000 - 1-5/8" x 1-5/8", 12 Gauge Channel, Metal Framing Strut, Solid

$51.48
Finish:Pregalvanized Zinc
Length:10'
Quantity:

CUT TO A CUSTOM LENGTH? MAY SAVE ON SHIPPING

HOW WOULD YOU LIKE IT CUT?

Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order. eg - 4 cuts per stick x 5ft per section

Unistrut's P1000 is the original metal framing strut channel and has been used in countless applications for nearly 100 years. Commonly known as 12 Gauge Standard or Deep Strut Channel, it is the global standard for strut metal framing. This channel is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing. For application examples, refer to our Unistrut Application Showcase.

Features:

  • OPM pre-approved for seismic applications
  • UL and CSA listed for use as a Strut-Type Channel Raceway
  • Punched holes are also available for ease of installation
  • Available in Pre-Galvanized (PG), Atkore Defender (DF), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Gold (ZD), Stainless Steel (SS or ST) and Aluminum (EA)
  • Made in the USA


Brands Available:

  • Unistrut

 

Beam Loading

Beam Loading - P1000
Span
(in)		 Max Allow.
Uniform Load
(lbs)		 Deflection at
Uniform Load
(in)		 Uniform Loading at Deflection Lateral Bracing
Reduction Factor
Span/180
(lbs)		 Span/240
(lbs)		 Span/360
(lbs)
24 1,690 0.06 1,690 1,690 1,690 1.00
36 1,130 0.13 1,130 1,130 900 0.94
48 850 0.22 850 760 500 0.88
60 680 0.35 650 480 320 0.82
72 560 0.5 450 340 220 0.78
84 480 0.68 330 250 160 0.75
96 420 0.89 250 190 130 0.71
108 380 1.14 200 150 100 0.69
120 340 1.40 160 120 80 0.66
144 280 2.00 110 80 60 0.61
168 240 2.72 80 60 40 0.55
192 210 3.55 60 50 NR 0.51
216 190 4.58 50 40 NR 0.47
240 170 5.62 40 NR NR 0.44
Note NR - Not Recommended

Refer to the General Specifications for loading information.

Column Loading

Column Loading - P1000
Unbraced
Height
(in)		 Allowable
Load at
Slot Face
(lbs)		 Max Column Load
Applied at C.G.
K=0.65 (lbs) K=0.80 (lbs) K=1.0 (lbs) K=1.2 (lbs)
24 3,550 10,740 9,890 8,770 7,740
36 3,190 8,910 7,740 6,390 5,310
48 2,770 7,260 6,010 4,690 3,800
60 2,380 5,910 4,690 3,630 2,960
72 2,080 4,840 3,800 2,960 2,400
84 1,860 4,040 3,200 2,480 1,980
96 1,670 3,480 2,750 2,110 1,660
108 1,510 3,050 2,400 1,810 KL/r>200
120 1,380 2,700 2,110 KL/r>200 KL/r>200
144 1,150 2,180 1,660 KL/r>200 KL/r>200
Refer to the General Specifications for loading information.

Elements of Section

Elements of Section - P1000
Area of Section 0.555 in2 (3.6 cm2)
Axis 1-1 Axix 2-2
Moment of Inertia (I) 0.185 in4 (7.7 cm4) 0.236 in4 (9.8 cm4)
Section Modulus (S) 0.202 in3 (3.3 cm3) 0.290 in3 (4.8 cm3)
Radius of Gyration (r) 0.577 in (1.5 cm) 0.651 in (1.7 cm)

General Specifications

Standard Lengths:

  • 10 feet:  10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
  • 20 feet:  20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)

Special Lengths:

Curved Channel:

  • Many Unistrut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.

Load Data:

  • All beam and column load data pertains to carbon steel and stainless steel channels.
  • Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
  • Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
  • Loads are based on 33 ksi steel cold formed to 42 ksi.
  • Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
  • Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide under Resources.
  • For bearing loads, reference our Bearing Loads Page.

Materials & Finishes

Materials & Finishes - Standard:

  • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
  • Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
  • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
  • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
  • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
  • Plain (PL):  Conforms to ASTM A1011 SS GR 33
Materials & Finishes - Special Metals:
  • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
  • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
  • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

* These materials have different physical properties and performance characteristics. Please contact us for design support.

 

P1000 CUT SHEET PDF DOWNLOAD