|Beam Loading - P6000|
|Max Allow. Uniform Load
|Deflection at Uniform Load
|Uniform Loading at Deflection||Lateral Bracing Reduction Factor|
- Product dimensions are 13/16" wide x 13/16" tall x 19 ga. thick, solid
- Punched holes are also available for ease of installation
- Light gauge
- Ideal for light-duty applications
- Our P6000 is available in Pre-Galvanized (PG), Plain (PL), Stainless Steel (SS) and Aluminum (EA).
- Made in the USA
|Column Loading - P6000|
Load at Slot Face
|Max Column Load Applied at C.G.|
|K=0.65 (lbs)||K=0.80 (lbs)||K=1.0 (lbs)||K=1.2 (lbs)|
Elements of Section
|Elements of Section - P6000|
|Area of Section||0.107 in2 (0.7 cm2)|
|Axis 1-1||Axix 2-2|
|Moment of Inertia (I)||0.009 in4 (0.4 cm4)||0.012 in4 (0.5 cm4)|
|Section Modulus (S)||0.020 in3 (0.3 cm3)||0.029 in3 (0.5 cm3)|
|Radius of Gyration (r)||0.295 in (0.7 cm)||0.333 in (0.8 cm)|
- 10 feet: 10' ± 1/2" (13 mm)
- 16 feet: 16' ± 1/2" (13 mm)
- All beam and column load data pertains to carbon steel and stainless steel channels.
- Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
- Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
- Loads are based on 33 ksi steel cold formed to 42 ksi.
- Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
- Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
- For bearing loads, reference our bearing loads page.
- Welded channels are spot welded 2" (51 mm) or 3" (76 mm) on-center.
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.