DEWALT AC100+ Gold® Adhesive Concrete Anchoring System

VINYLESTER INJECTION ADHESIVE CONCRETE ANCHORING SYSTEM- 08478SD

Manufacturer: DeWalt

The AC100+ Gold is a two-component vinylester adhesive concrete anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment.The AC100+ Gold is designed for bonding threaded rod and reinforcing bar elements into drilledholes in concrete and masonry base materials.(12PC BOX)

APPLICATIONS

• Bonding threaded rod and reinforcing bar into hardened concrete and masonry
• Evaluated for use in dry and water-saturated concrete including water filled holes
• Suitable to resist loads in cracked or uncracked concrete base materials for cases where anchor design theory and criteria applies
• Can be installed in a wide range of base material temperatures; qualified for installations structural applications in concrete as low as 14ºF
• Qualified for seismic and wind loading (see ESR-2582) 

FEATURES

• Designed for use with threaded rod and reinforcing bar hardware elements
• Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
• Evaluated and recognized for freeze/thaw performance
• Evaluated and recognized for a range of embedments in interior and exterior applications
• Versatile low odor formula with quick cure time
• Evaluated and recognized for long term and short term loading (see performance tables)
• Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
• Cartridge design allows for multiple uses using extra mixing nozzles

APPROVALS

• International Code Council, Evaluation Service (ICC-ES) ESR-2582 for concrete
• International Code Council, Evaluation Service (ICC-ES) ESR-3200 for masonry
• International Code Council, Evaluation Service (ICC-ES) ESR-4105 for Unreinforced Masonry (URM)
• Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
• Tested in accordance with ASTM E488 / ACI 355.4 and ICC-ES AC308 for use in structural concrete with ACI 318-14 Chapter 17 or ACI 318-11/08 Appendix D
• Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects; meets requirements for materials in contact with potable water and water treatment
• Conforms to requirements of ASTM C 881 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes A & B (meets Type III with exception of elongation)
• Department of Transportation listings – see www.DEWALT.com or contact transportation agency 

Mfr. Cross Reference

• Hilti HY 200, Hilti HY 100
• Simpson AT-XP
• Red Head Epcon S7

AC100 Gold+ Specs

Power Anchor Selection Chart