DEWALT Pure 110+® Adhesive Anchoring System

Unistrut Service Company

DEWALT Pure 110+® Adhesive Anchoring System

Sale price$0.00
Sold out


Manufacturer: DeWalt

The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials. Pure110+ has the same bond strength at room temperature and at 110єF.

This is a box of 12, 9oz (265ml.) Quick-Shot Tubes. 


  • Bonding threaded rod and reinforcing bar into hardened concrete
  • Evaluated for installation and use in dry and wet holes, including water filled and underwater
  • Can be installed in a wide range of base material temperatures 


  • Designed for use with threaded rod and reinforcing bar hardware elements
  • Evaluated and recognized for freeze/thaw performance
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Evaluated and recognized for long term and short term loading (see performance tables)
  • Same bond strength at room temperature and at 110ºF.


  • International Code Council, Evaluation Service (ICC-ES) ESR-3298 for cracked and uncracked concrete
  • Code Compliant with 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC
  • Conforms to requirements of ASTM C 881 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes B & C (also meets Type III except for elongation)
  • Department of Transportation listings – see or contact transportation agency
  • Tested in accordance with ACI 355.4, ASTM E 488, and ICC-ES AC308 for use in structural concrete (Design according to ACI 318-14, Chapter 17 and ACI 318-11/08 Appendix D)
  • Tested and qualified for use in post-installed reinforcing bar connections
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
  • Compliant with NSF/ANSI 61 for drinking water system components - health effects; minimum requirements for materials in contact with potable water and water treatment

      Mfr. Cross Reference

      • Hilti RE-500SD / HY-200
      • Simpson SET-XP
      • Red Head Epcon G5 / C6+


      Pure 110+ Specs


      Power Anchor Selection Chart