Beam Loading - P1004A | ||||||
---|---|---|---|---|---|---|
Span (in) |
Max Allowable Uniform Load (lbs) |
Deflection at Uniform Load (in) |
Uniform Loading at Deflection | Lateral Bracing Reduction Factor | ||
Span/180 (lbs) |
Span/240 (lbs) |
Span/360 (lbs) |
||||
24 | * 9,100 | 0.01 | * 9,100 | * 9,100 | * 9,100 | 1.00 |
36 | * 9,100 | 0.05 | * 9,100 | * 9,100 | * 9,100 | 1.00 |
48 | 7,000 | 0.08 | 7,000 | 7,000 | 7,000 | 0.94 |
60 | 5,600 | 0.13 | 5,600 | 5,600 | 5,600 | 0.89 |
72 | 4,660 | 0.19 | 4,660 | 4,660 | 4,660 | 0.83 |
84 | 4,000 | 0.26 | 4,000 | 4,000 | 3,630 | 0.78 |
96 | 3,500 | 0.34 | 3,500 | 3,500 | 2,780 | 0.72 |
108 | 3,110 | 0.43 | 3,110 | 3,110 | 2,200 | 0.67 |
120 | 2,800 | 0.52 | 2,800 | 2,670 | 1,780 | 0.62 |
144 | 2,330 | 0.75 | 2,330 | 1,850 | 1,230 | 0.52 |
168 | 2,000 | 1.03 | 1,810 | 1,360 | 910 | 0.44 |
192 | 1,750 | 1.34 | 1,390 | 1,040 | 690 | 0.38 |
216 | 1,550 | 1.69 | 1,100 | 820 | 550 | 0.34 |
240 | 1,400 | 2.10 | 890 | 670 | 440 | 0.31 |
Unistrut
Unistrut P1004A - 1-27/32" x 4-7/8", 12 Gauge, Metal Framing Strut, Plates on Each Side
Length:10'
Finish:Perma-Green® III
Quantity:
CUT TO A CUSTOM LENGTH? MAY SAVE ON SHIPPING
HOW WOULD YOU LIKE IT CUT?
Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order. eg - 4 cuts per stick x 5ft per section
12 Gauge Welded Strut Channel with Side Plates P1004A (plates on each side) which provides a premium allowable moment over a traditional triple combination channel due to the side-wall reinforcements. This channel is commonly used for electrical supports, mechanical supports, pipe, conduit, duct and cable tray supports, and other general framing. For application examples, refer to our Application Showcase.
Features:
- 2-sided attachment
- Product dimensions are 1 27/32" wide x 4 7/8" tall x 12 ga. thick; with plates on each side.
- Our P1004A is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Zinc Dichromate (ZD) and Stainless Steel (SS).
- High capacity for heavy load requirements
- Made in the USA
Brands Available:
- Unistrut
Beam Loading
Column Loading
Column Loading - P1004A | |||||
---|---|---|---|---|---|
Unbraced Height (in) |
Allowable Load at Slot Face (lbs) |
Max Column Load Applied at C.G. |
|||
K=0.65 (lbs) | K=0.80 (lbs) | K=1.0 (lbs) | K=1.2 (lbs) | ||
24 | 11,420 | 36,800 | 33,890 | 30,440 | 27,600 |
36 | 10,600 | 30,840 | 27,600 | 24,400 | 22,160 |
48 | 9,860 | 26,400 | 23,560 | 21,060 | 19,470 |
60 | 9,160 | 23,370 | 21,060 | 19,160 | 18,020 |
72 | 8,610 | 21,310 | 19,470 | 18,020 | 17,140 |
84 | 8,170 | 19,890 | 18,410 | 17,260 | 15,240 |
96 | 7,790 | 18,890 | 17,670 | 16,760 | 11,670 |
108 | 7,460 | 18,160 | 17,140 | 13,280 | 9,220 |
120 | 7,150 | 17,590 | 16,760 | 10,750 | 7,470 |
144 | 5,660 | 16,840 | 11,670 | 7,470 | KL/r>200 |
168 | 4,520 | 12,990 | 8,570 | KL/r>200 | KL/r>200 |
Elements of Section
Elements of Section - P1004A | ||
---|---|---|
Area of Section | 1.965 in2 (12.7 cm2) | |
Axis 1-1 | Axix 2-2 | |
Moment of Inertia (I) | 4.068 in4 (169.3 cm4) | 1.092 in4 (45.5 cm4) |
Section Modulus (S) | 1.669 in3 (27.4 cm3) | 1.190 in3 (19.5 cm3) |
Radius of Gyration (r) | 1.439 in (3.7 cm) | 0.745 in (1.9 cm) |
General Specifications
Standard Lengths:
- 10 feet: 10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
- 20 feet: 20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)
Special Lengths:
Curved Channel:
- Many Unistrut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.
Load Data:
- All beam and column load data pertains to carbon steel and stainless steel channels.
- Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
- Loads are based on 33 ksi steel cold formed to 42 ksi.
- Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
- Beam loads are based on a simple beam are given as total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
- For bearing loads, reference bearing loads page.
Welds:
- Welded channels are spot welded 2" (51 mm) or 3" (76 mm) on-center.
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.